All versions require IOMMU to be enabled in the BIOS. You can check the VBS status using msinfo32. If the requirements are not met, use the administrator's CMD to execute the specified command to shut down the hypervisor, and then restart for the changes to take effect.

On the primary PC, start the loader, select the version, enable OBS, and load the configuration in sequence. OBS cannot be disabled. For the secondary PC, one-click Deploy mode is recommended. When manually replacing DLLs, pay attention to file permissions; you will need to replace them again after each update.

Preferably use Cat-8 Ethernet; Wi-Fi is not recommended. If loading fails, check the system configuration. If verification fails, temporarily use a VPN. After deployment, run a speed test tool and verify the firewall, connection method, and other final check items.